SIGN UP FOR OUR NEWSLETTER
Receive our latest updates about our products & promotions.
info@aceland.store
🚚Free Shipping Nationwide W/Liftgate
📞Call / Text: 626-362-2567; 909-908-8170; 657-286-9925
No se pudo cargar la disponibilidad de recogida
Free curbside delivery in all lower 48.
No inside delivery due to liability.
The Everest Refrigeration EPBNR3-D2 sandwich and salad prep table’s refrigeration system is back mounted. For proper ventilation to prevent overheating, it’s front-air breathing. This self-contained system includes a detachable Blizzard R290 condensing unit, full-length air duct, and large-capacity coils to keep the compartment cool. For quick product pull down, the fan’s motors are electronically commutated. The installed defrost system combats the collection of frost, and the self-maintaining condensate pan collects excess moisture. Users can adjust the unit's holding temperature from 33 to 54 degrees Fahrenheit with the electronic controls.
The Everest Refrigeration EPBNR3-D2 prep table’s cabinet has a 19-cubic-foot capacity. Constructed with the cabinet is a solid door and two drawers. The door compartment holds one epoxy-coated shelf, while the drawers support various pan configurations. For a tight seal, the door and drawers feature magnetic snap-in gaskets. The unit’s interior and exterior are made of stainless steel, while the bottom and rear are made of galvanized steel for durability. The thick polyurethane insulation maintains temperature consistency by locking in cold air and resisting heat.
Spec Attribute | Spec Value |
---|---|
Manufacturer | Everest Refrigeration |
Cutting Board Depth (in) | 12.25 |
Depth (in) | 31.5 |
Front Access | Door/Drawer |
Height (in) | 38.5 |
Hertz | 60 |
Max Pan Depth (in) | 6 |
NEMA | 5-15P |
No. of Doors | 1 |
Phase | 1 |
Product | Prep Tables |
Product Type | Commercial Refrigeration |
Rating | Better |
Refrigerant | R290 (Hydrocarbon) |
Series | EPB Series |
Type | Standard |
Use | Sandwich/Salad |
Voltage | 115 |
Warranty | 3-year Parts & Labor; 5-year Electrical; 10-year Compressor |
Width (in) | 71.13 |
Weight | 473.00 |
Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
Ideal for sandwich shops, pizzerias, and salad bars needing chilled ingredient storage directly on the prep line.
*Free shipping on Everest Refrigeration EPBNR3-D2 within the 48 contiguous states.
Drawered Sandwich Prep Table, two-section, 71-1/8"W, 19.0 cu. ft. capacity, self-contained rear mounted refrigeration, stainless steel top with opening for (18) 1/6 size pans, (1) 1/2" thick insulated top lid, (1) solid hinged self-closing door, (2) heavy duty stainless steel drawers, (1) epoxy coated wire shelf, height adjustable clips, 12-1/4" removable cutting board, digital controls with LED display, auto defrost, front air breathing, stainless steel interior, stainless steel front, top & sides, galvanized steel bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 3.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation (drawer pans not included)
*Image may not depict product color, inclusions or accessories.
This product includes a cord and plug
Product made with Hydrocarbon Refrigerants
Food Pans are not included with this item
This product comes with a NEMA 5-15P plug
Aceland Corporation offers free curbside shipping for all items, excluding additional accessorial charges (i.e. limited access, redelivery fee, detention fee, etc), unless additionally specified, to all US states, except Hawaii and Alaska (For shipments going to Hawaii and Alaska, please feel free to reach out to us for a competitive quote). Shipping normally takes 2-8 business days, inapplicable to unexpected special occasions that might delay the shipments. Standard Shipping Notes: *Our shipments are not guaranteed delivery, as we cannot control the carrier service once the order has been shipped. The exception to this is orders are placed and shipped using methods that include a guaranteed delivery date. *If an order is cancelled or refused (unless refused as damaged shipment) after it has been shipped, a 25% restocking fee and the full freight cost will be charged to the customer. *Please inspect all units upon arrival no matter what the outside packaging looks like. If there are too many units to inspect, or you are unsure about the inside condition, or the driver refuses to let you inspect the equipment, you MUST write on the proof of delivery/delivery slip before the driver leaves "SUBJECT TO INSPECTION". Failure to do so will result in the loss of a claim and we will not be able to send replacement parts, issue a discount or replace the equipment. Please see the attached for more freight receipt precautions. Aceland cannot be held liable for those damages not listed in the freight acceptance form!
Items must be returned in NEW (unused, untested, and resalable) condition, in the original manufacturer packaging, with all accessories, kit components, promotional items and instruction manuals included. For your protection, items must be returned shipping prepaid, insured for the full value and safely wrapped to prevent shipping damage. Items that have been used by the customer or items that have been damaged by use cannot be returned to us. We also cannot accept returns on orders where a promotional item has not been returned with the order. These ‘extras’ must be included with your return to qualify for a full refund. When repacking an item for return, please be sure to include all the free and promotional items that came with your order as well as all applicable accessories and literature. Generally, as a “rule-of-thumb" you should return the items to us the same way we sent them to you - in the same condition and with all the original contents. If a promotional item is missing, its value will be added to the original price you paid for the order, thus reducing the amount of the refund, if such is issued. All return requests for the orders with any shipments that are drop shipped from our suppliers, we will need follow the return and refund policies by the suppliers. We do not accept returns on customized orders.
To qualify for a refund, our Return Conditions and Return and Exchange Instructions must be followed. If our steps are not followed, a refund may be issued in accordance with the condition of the returned merchandise and the value of any missing items. Refunds are not issued before the merchandise has been received, evaluated and processed by our Returns Team. Our/Manufacturer’s restocking fee charge(s) may differ, to cover our processing, packing and shipping expenses. Additional fees may apply if the item is not returned in its original packaging. Your satisfaction is always our top priority. We work with our vendor partners to guarantee the quality of our products and we want you to be completely satisfied with your purchase. If for any reason you are not completely satisfied with your purchase, Please call us.